The functions of Pavitex geosynthetics
The UNI EN ISO 10318 regulation determines the main functions for geosynthetics, which have been reported in the table below.
The most suitable product can be chosen depending on the specific function required.
|
SeparationGeosynthetics designed to prevent mutual contamination of adjoining soils with different characteristics or of other filling materials. Products |
|
FiltrationGeosynthetics designed to retain soil or other particles subject to hydrodynamic forces, but to grant the passage of fluids. Products |
|
ProtectionGeosynthetics designed to prevent or limit local damages on waterproofing membranes. Products |
|
ReinforcementHigh-performing geosynthetics designed to improve the mechanical properties of soil or other building materials. Products |
|
DrainageGeosynthetics designed to collect and transport meteoric and stratum waters and/or other fluids into the plain. Products |
|
Erosion ControlGepsynthetics designed to prevent or limit the movement of superficial soil layers on slopes. Products |
Separation
Geosynthetics designed to prevent mutual contamination of adjoining soils with different characteristics or of other filling materials.

Multicoloured polypropylene non-woven needle-punched and thermo-welded geotextile.

White non-woven needle-punched thermo-welded high-tenacity polypropylene geotextile.

Draining geocomposite composed of a polyethylene close mesh mat combined with low gram-weight non-woven geotextile.

Draining geocomposite composed of a three-dimensional polypropylene geomat combined on both sides with a non-woven polypropylene geotextile.
Filtration
Geosynthetics designed to retain soil or other particles subject to hydrodynamic forces, but to grant the passage of fluids.

Multicoloured polypropylene non-woven needle-punched and thermo-welded geotextile.

White non-woven needle-punched thermo-welded high-tenacity polypropylene geotextile.

Draining geocomposite composed of a polyethylene close mesh mat combined with low gram-weight non-woven geotextile.

Draining geocomposite composed of a three-dimensional polypropylene geomat combined on both sides with a non-woven polypropylene geotextile.
Protection
Geosynthetics designed to prevent or limit local damages on waterproofing membranes.

Multicoloured polypropylene non-woven needle-punched and thermo-welded geotextile.

White non-woven needle-punched thermo-welded high-tenacity polypropylene geotextile.

Draining geocomposite composed of a polyethylene close mesh mat combined with low gram-weight non-woven geotextile.

Draining geocomposite composed of a three-dimensional polypropylene geomat combined on both sides with a non-woven polypropylene geotextile.
Reinforcement
High-performing geosynthetics designed to improve the mechanical properties of soil or other building materials.

Rampant 100% polypropylene geomat with a high voids ratio potentially reinforced with a woven polymer-coated polyester geogrid.
Drainage
Geosynthetics designed to collect and transport meteoric and stratum waters and/or other fluids into the plain.

Anti-erosion groove composed of a rampant geomat on the upper side, an intermediate non-woven geotextile and a waterproofing film on the lower side.

Draining geocomposite composed of a three-dimensional polypropylene geomat combined on both sides with a non-woven polypropylene geotextile.
Erosion Control
Gepsynthetics designed to prevent or limit the movement of superficial soil layers on slopes.

Rampant 100% polypropylene geomat with a high voids ratio potentially reinforced with a woven polymer-coated polyester geogrid.


Anti-erosion groove composed of a rampant geomat on the upper side, an intermediate non-woven geotextile and a waterproofing film on the lower side.
